home battery storage capacities

Comparing storage capacities of home batteries

Reading Time: 4 minutes

The home storage revolution is here, and there are plenty of options when it comes to home batteries that you can install. In this article, we’ll talk about battery capacity – what it is, why it matters (or doesn’t), and how battery models stack up against one another.

Save thousands on a solar and storage installation

Key takeaways

  • Eguana, Electriq Power, and sonnen currently make the home batteries with the most capacity
  • Battery capacity can be a misleading metric – in many cases, you can stack multiple batteries together to make a larger system
  • Compare solar-plus-storage quotes from local installers on EnergySage

What is battery capacity? How is it measured?

When manufacturers or installers talk about battery capacity (also referred to as energy capacity), they’re usually talking about one of two metrics a battery is rated on: total capacity and usable capacity. We’ll get into why those are different further down. For the time being, it’s all just “capacity”.

At its core, battery capacity simply means the amount of energy stored in a home battery, measured in kilowatt-hours (kWh). Here’s a more complete definition of energy capacity from our glossary of key energy storage terms to know:

The energy capacity of a storage system is rated in kilowatt-hours (kWh) and represents the amount of time that you can power your appliances. Energy is power consumption multiplied by time: kilowatts multiplied by hours to give you kilowatt-hours. In order to understand the energy sizing of batteries, you need to know how long you want to be able to run your appliances with your battery. Running many appliances for a long period of time would require a larger battery from both a power and energy (capacity) perspective while running fewer appliances for a shorter period of time would require a smaller battery from a power and energy perspective. 

To give a sense of the energy usage of different appliances, keeping ten CFL light bulbs on for six hours uses nearly 1 kilowatt-hour of electricity (10 CFLs * 15 Watts per bulb * six hours). A television or refrigerator may use 1 kilowatt-hour of electricity over a full 24 hours, depending upon how often the TV is turned off and on and to what temperature the refrigerator is set. Running a central air conditioner, on the other hand, could use 10 kilowatt-hours per day. 

Total capacity vs. usable capacity

Batteries are rated for two different capacity metrics: total and usable. Because usable capacity is most relevant to the amount of energy you’ll actually get from a battery, we like to use usable capacity as the main “capacity” metric by which to compare storage products. 

Also from our energy storage glossary, see how the two terms differ below:

Total capacity (kWh)

How much electricity is stored in the battery in total when fully charged. Expressed in kilowatt-hours, this is an energy metric that demonstrates the amount of electricity that would be available if you could fully discharge your battery all the way to zero. 

Usable capacity (kWh)

The amount of electricity stored in the battery that is available for consumption. Batteries have their own native load requirements. In other words, batteries require a certain amount of electricity to continue to run themselves. As a result, not all of the electricity that is stored in a battery is available for you to consume. If you try to use beyond the usable energy of a battery, it may have detrimental impacts on the health and longevity of your battery.

Why does capacity matter?

Just like any other battery, the more energy it can store, the more stuff you can usually power with it. Of course, there are other factors (like power rating and chemistry), but as a general rule of thumb, more capacity means more devices powered for longer periods of time.

For home batteries, this means that if the grid goes down, you’ll have power for longer with a bigger battery. It also means that if you’re using your home battery to avoid buying electricity during peak, expensive hours (such as in a region on TOU rates), you can spend more time pulling from your battery and potentially avoid the high-cost block entirely. Especially if you’re charging your battery during the day with solar panels, beefing up capacity is a great way to ensure you’re getting maximum savings on electricity from a storage system.

The big caveat: home batteries are (often) stackable

Battery capacity is very important, but, perhaps more importantly, a single battery’s capacity isn’t necessarily the capacity you’ll install. For example, you can install multiple Tesla Powerwall batteries together to create a system that is many times larger than an individual battery. If physical space is an issue for you, that’s when battery capacities in a single product will be more important. For homes with large electric bills, you’ll almost always have to install a stacked battery system to store enough energy.

Biggest batteries: top brands compared

Individual battery capacity only matters to a certain extent, but it can certainly be an important factor. Below, we’ve included a table of the largest battery from each of the most common home battery brands, ranked from highest capacity to lowest:

Biggest home batteries: battery model capacity ranked

Manufacturer/battery modelUsable capacityTotal capacity
Eguana Elevate39 kWh39.1 kWh
Electriq Power PowerPod34.2 kWh34.2 kWh
sonnen ecoLinx30 kWh30 kWh
NeoVolta NV2424 kWh24 kWh
QCELLS Q.HOME18.9 kWh18.9 kWh
Fortress Power eVault18.5 kWh18.5 kWh
SimpliPhi AccESS18.2 kWh22.8 kWh
Panasonic EVAC-10517.1 kWh20.3 kWh
Generac PWRcell17.1 kWh20.3 kWh
Blue Ion 2.016 kWh16 kWh
LG Chem RESU Prime16 kWh16 kWh
Tesla Powerwall13.3 kWh14 kWh
Enphase Encharge10.08 kWh10.5 kWh

Like we noted above, the capacity of an individual battery doesn’t always mean much for battery-to-battery comparisons. For example, while the Tesla Powerwall is one of the smallest batteries on this list, it is far and away one of the most popular products on the market. At the end of the day, it’s important to find a home battery with the functionality and performance you want, because most products can be combined to create larger capacity battery banks.

Compare your storage and solar options on EnergySage

No matter what battery you have your eye on, the best way to know you’re getting the best deal for a high-quality installation is to compare multiple quotes. On the EnergySage Marketplace, installers compete for your business, so you know you’re getting a great price for a solar+storage system. Sign up today for free to get started, or begin with an instant estimate of your savings potential. 

storage content
battery and solar prices
Save thousands on a solar and storage installation
Posted on by .
Categories: Energy Storage
Tags: , ,

About Jacob Marsh

Jacob is a researcher and content writer at EnergySage, where he focuses primarily on current issues–and new technology!–in the solar industry. With a background in environmental and geological science, Jacob brings an analytical perspective and passion for conservation to help solar shoppers make the right energy choices for their wallet and the environment. Outside of EnergySage, you can find him playing Ultimate Frisbee or learning a new, obscure board game.

One thought on “Comparing storage capacities of home batteries

  1. Avatarpatricia a nelson

    We installed a solar system about a year ago where we live in Sun City West, AZ.
    1. We are concerned about power interruption for any the variety of reasons. We would like to purchase a battery system that works with our solar system and allowable with the power company.
    2. We are somewhat concerned about sun spots or EMP. It is our understanding there is a devise to put on the power box that “hardens” or block the battery and solar system from becoming fried.
    Patricia Nelson


Leave a Reply

Your email address will not be published. Required fields are marked *