What should you look at to determine if you’re getting a good deal on solar? There are lots of things to pay attention to when deciding on a solar energy system; but two of the most useful metrics for evaluating the cost and value of a solar power offer are price per watt, measured in dollars per watt of energy ($/W), and ‘levelized cost of energy’ (LCOE).
You can use cost per watt ($/W) to compare solar energy system installation prices and solar power costs, while LCOE is great for comparing the average per-unit cost of the electricity the system will produce. We discuss both $/W and LCOE in detail in this article.
Price per watt – How much will my solar energy system cost?
Solar systems sizes are usually described in kilowatts (kW, where 1kW = 1,000 watts). If you are planning on purchasing your solar panel system (either with cash or a solar loan), you’ll want to know how much a system will cost per watt.
The $/W cost of a solar system is not important to you if you are planning on going solar under a solar leasing or power purchase agreement (PPA) program. Under these programs, a third part owns your solar system, selling you only the electricity that it produces.
How do you calculate $/W for a solar panel system?
To calculate $/W, take the total out-of-pocket cost of the system that you are considering and divide it by the number of watts of capacity in the system. For example, a 5kW solar system has 5000 watts. If that system costs $15,000, then the cost per watt is ($15,000 / 5000W =) $3/W.
When you’re comparing figures, make sure that you understand whether the price you’re looking at incorporates the Investment Tax Credit (ITC) incentive. The ITC effectively reduces your solar energy system’s total cost by 26%). For example, the $/W cost of the system described above is $15,000 before the ITC. After the ITC is taken into account, it will be about ($15,000 x 74% =) $11,100, (around $1.80/W). Additional state tax credits and other rebates may further reduce the price.
Why is $/W a useful metric?
Once you have a $/W figure for a solar system, you can easily compare its basic value to other systems, regardless of size differences. For example, imagine you’re considering a 7kW solar system costing $20,300 and a 6kW solar system costing $17,400. How do you know which one offers more value (more ‘bang for your buck’)?
Because they are differently sized systems, at first glance you might think that you cannot meaningfully compare them by their price tags alone. But in fact, both systems cost $2.90/W – meaning that with either system offers the same value in terms of its maximum power output.
Remember that cost is not the only factor to look at when considering going solar: We have put together a list of other important metrics here: “Don’t just focus on dollars per watt when you evaluate quotes“.
What is levelized cost of energy?
Levelized cost of energy (LCOE) is the average amount that you will pay for each unit of electricity that your solar energy system will produce over its lifetime. LCOE is usually displayed as a ‘cents per kilowatt-hour’ figure (¢/kWh). You might recognize ¢/kWh from your monthly electricity bill – it’s the amount you are charged for each unit of electricity delivered to your home.
LCOE is a useful number to look at whether you are considering purchasing your system, or planning on going solar with a solar lease or PPA arrangement.
How do you calculate solar LCOE?
LCOE is calculated by dividing the total out-of-pocket cost of your solar energy system by the estimated total amount of energy your solar system will produce over a given period of time. It is typical to look at a 20-year period when calculating LCOE, although a system will actually continue to produce power for over 30 years.
LCOE is more complicated to calculate than $/W because there are more factors involved – and because it is an estimate of future production.
To roughly calculate LCOE, you should know (or be able to estimate):
- The total cost of the system, after tax incentives and rebates are taken into account.
- The amount of sunlight the panels are likely to receive daily. An annual average is usually sufficient for this: e.g. 5kWh of pure solar energy per square meter of area per day, on average throughout the year (note that this number will be higher in summer and lower in winter).
- The overall efficiency of your system. It is common practice to assume that a system will have an overall efficiency rate of 80% – but it could be greater or lesser depending on things like the the tilt angle and orientation of your panels, the efficiency of your inverter, and whether or not there is partial shading on your panels.
To calculate the LCOE of a solar system, it’s also useful to know:
- The annual rate of degradation for your solar panels. All solar panels gradually grow less and less efficient over time. (This is fairly complicated to calculate without a spreadsheet program. You can read more about degradation in our article, “Key metrics for comparing solar panels”.)
- Any SREC benefits you may be eligible for. SRECs payments are usually counted as a ‘bonus’ on top of the electricity bill savings associated with going solar. However, not all states have SREC markets, so check if there is one where you live.
As an example, if you live in Los Angeles (where there is 5.26kWh of sun daily on average throughout the year) and you’re looking at a 5kw system with a net cost of $9,000, you can estimate its LCOE accordingly:
- Solar energy produced over 20 years: 5kW x 5.62kWh of sun daily x 365 days x 20 years x 80% efficiency = 164,000kWh
- Cost of the system divided by solar energy produced: $14,500 / 164,000kWh = 9¢/kWh.
For simplicity’s sake, we have excluded ‘annual degradation’ and ‘SREC benefit’ from our calculations in the Los Angeles example above. However, if you’d like to see more detailed LCOE figures for your location, you can get an Instant Estimate or shop on our Solar Marketplace.
Why is LCOE a useful metric for PV?
LCOE is handy because:
- It allows you to compare the cost of electricity produced by two different solar energy systems side-by-side, thus allowing you to see which one is likely to save you more money on your power bills. For example, the LCOE of one solar system might be 5.5¢/kWh, while another may have an LCOE of 8¢/kWh.
- You can use it to compare the average cost of energy produced by your solar energy system vs the amount you would pay for electricity from your utility. Utility rates are higher than solar rates in many states. (Hawaii, for example, has some of the highest electricity rates in the nation, at over 30¢/kWh.) Knowing the LCOE of a system therefore allows you to estimate how much money it will save you over its lifetime.
Remember: LCOE is an estimate
While LCOE is a useful metric for comparing the cost of solar electricity from your system over its lifetime, be aware that actual figures will vary. For example, if your solar panel system produces more electricity than expected over its lifetime, the LCOE at the end of 20 years will be lower than the initial estimate. Conversely, if your system produces less electricity over its lifetime (e.g. due to a malfunction that results in significant downtime), the actual LCOE will be higher.
What does this mean for you as a solar shopper? It means that you should do your research into the quality of your system’s components as well as the warranties that back them up. Most solar panel systems will have no issues during their operational lives, but knowing exactly what you’re signing up for will help to minimize problems and disappointment in the future.
Let EnergySage do the math for you: compare solar quotes with us for free
EnergySage is the nation’s premier solar quote comparison service. We make it easy for you to compare solar offers from a range of installation companies. Get an instant estimate or sign up to shop on our Solar Marketplace today.